Li-Ion Battery Module 48V150Ah

•Voltage: 48V
•Nominal Energy: 7.2 kWh
•Continuous Current: 150 A
•Peak Discharge (3 sec): 300Adc
•Dimension: W17.3″* D19.7″*H8.7″
•Weight: 150Lbs / 67.8kg 
•Longevity : 6000@90%DOD 0.5C
•Warranty: 5 years full replacement /10 years prorated warranty
•Certificate: UL1642, IEC62133, UN38.3
•Scalability: Maximum 15 units in Parallel
•Communication:RS485,Canbus,Modbus/SNMP

details


48V Series Li-Ion Battery Module

Range Summary:

FnS 48V Li-ion Battery Module Series is a 48V deep cycle lithium iron phosphate (LiFePO4) battery and equipped with highly reliable and safe  prismatic cells, build-in BMS, and smart remote control DTU.

It is rack-mounted, light-weight and scalable for installation into standard 19″ rack or cabinet. FNS LiFePO4 48v battery is inherently safe and robust, and designed to have an extremely long life cycle due to the stable chemical composition. 

Built-in Li-Ion Battery Module Management System (BMS) protects the cells against excessively high or low voltages, high currents, short circuits, and excessive heat or cold. Automatic cell balancing (by the BMS) reduces the charging rate in cells that have been topped off first, letting the rest of the cells to regulate voltage. This ensures that the cells are always balanced and ensures the quality and efficiency of the battery. The BMS is designed to gaurantee a long lifetime, safe handling and high-accuracy State of Charge (SOC) calculations based on industry leading algorithms. Multiple batteries can be wired in parallel with up to 15 units for increased capacity (no series wiring). 

48v battery module has UL1973, UL1642, IEC62133, and UN38.3 certifications. Communication port: RS232, RS485, Canbus, Modbus/SNMP/TACP.

Distributed control is based on consistent coordination theory. Each distributed power source interacts with its neighboring distributed power sources and adjusts its state, and eventually, all states tend to be consistent, thus realizing global coordination control. According to whether there is a preset control target, it can be divided into distributed average consistency control and distributed pinning consistency control. Distributed average consistency control realizes local-global optimization of control decision without a central controller, and adapts to the higher requirements of microgrid control on reliability, real-time and scalability; Distributed pinning consistency control, by selectively applying pinning control to some distributed power sources, other distributed power sources search for synchronization based on communication coupling correlation direction and finally reach the preset target value globally.

Features:

• Intelligence: Built-in smart BMS, remote wireless DTU control and monitoring

• Longevity:6000@90%DOD 0.5C rate

• Warranty:5 years full replacement /10 years prorated warranty

• Low Cost: very competitive price per kWh

• Efficiency: 98% of round trip efficiency

• Compatibility: Compatible with all industry-standard inverter/charge controllers

• Safety: Lithium Iron Phosphate –the safest lithium-ion chemistry available, No cobalt, no thermal runaway or fire

• Maintenance: maintenance-free, no ventilation, cooling or thermal regulation required

Applications:

It can be used for off-grid solar systems, and for grid-tie or emergency backup power systems with or without solar. It is highly recommended for a residential energy storage system to maximize solar usage, lower electricity bill, and increase energy independence. 

• Off-grid Solar system

• Grid backup

• On-grid for self-consumption, TOU, zero export, demand charge

• UPS & emergency backup

• Telecom system

• Recreational Vehicles

• Marine system

 

Specifications:

Basic Parameters

Model

48V150Ah

Anode Material

LiFeO4

Nominal Voltage (V)

48

Layout

15S1P

Rated Capacity (Ah)

50 (0.5C25℃)

Rated Energy (kWh)

7.2

Dimensions (W×D×H) mm

               440X560X177(4U)         

Weight (kg)

                              68

Communication

RS485,CAN

Longevity

6000+ (90%DOD,25℃)

Electrical Characteristics

Voltage Window (V)

40.554

Charge Current (A)

75

Max Charge Current (A)

150

Max Discharge Current (A)

150

Operation Environment

Charge Temperature (℃)

0℃45℃ (Optimum15℃30℃)

Discharge Temperature (℃)

20℃50℃ (Optimum5℃45℃)

Storage Temperature (℃)

20℃55℃

Storage Humidity (RH)

5%90%

Working Humidity (RH)

5%90%

Protection Class

IP20

Standards

Executive Standards

IEC62619/IEC62133/UL1973/UL1642/UN38.3

ME Certifications

ISO9001/ISO14001/OHSAS18001

Looking forward to your inquiry for this Top OEM Li-Ion Battery Module 48V150Ah Manufacturer&Exporter

LEAVE YOUR MESSAGES

Send Inquiry Now

RELATED PRODUCTS